http://members.iracing.com/jforum/posts ... 23748.page
It is all there Rick, they have changed the FFB a lot since you last were in. What you describe sounds like your G25 is not at 900 degrees in the windows driver.
I would set the damping to 0 in game, uncheck use linear mode, min force can vary wheel to wheel. Also the on screen bars you can see for FPS, line quality etc. the F one at the bottom is FFB, so if it is red at all it is clipping and you need to turn the FFB down, which is also doable now from the car whilst driving in one of the black boxes.
Free 3 month promo
- MarkF
- Super
- Posts: 2289
- Joined: Thu Mar 06, 2008 8:29 am
- Location: Berkshire, UK
- Contact:
Re: Free 3 month promo
Last edited by MarkF on Sat Aug 23, 2014 1:20 pm, edited 1 time in total.
Regards
Mark
Mark
-
- Site Admin
- Posts: 5166
- Joined: Thu Mar 06, 2008 1:25 pm
- Location: Cheshire, UK
Re: Free 3 month promo
The full list of series is at http://members.iracing.com/membersite/member/Series.do with http://members.iracing.com/membersite/m ... eason=1153 for the SRF. You can also quickly access a series from the drop down list box that you get at the top left of the page as long as you've pressed the green "race now" button. I don't think any of this has actually changed substantially since launch
When calibrating you first turn the wheel the full way left & right and then, when asked, just 90 degrees as that's how iRacing determines the full range - it should report in the calibration screen that the lock-to-lock ratio is 900 degrees (assuming that's what you've got in the Logitec profiler). Then make sure you've got the wheel range & map range (top left corner of the options screen) to your lock-to-lock value. It should be linear then.
Since you last were a member they have actually put some useful info at http://members.iracing.com/membersite/m ... uction.jsp
When calibrating you first turn the wheel the full way left & right and then, when asked, just 90 degrees as that's how iRacing determines the full range - it should report in the calibration screen that the lock-to-lock ratio is 900 degrees (assuming that's what you've got in the Logitec profiler). Then make sure you've got the wheel range & map range (top left corner of the options screen) to your lock-to-lock value. It should be linear then.
Since you last were a member they have actually put some useful info at http://members.iracing.com/membersite/m ... uction.jsp
- Rick Stratton
- Legends Admin Team
- Posts: 5301
- Joined: Wed Mar 12, 2008 9:44 pm
- Location: Vermont USA
- Contact:
Re: Free 3 month promo
THanks Rik.Rik Walker wrote:...When calibrating you first turn the wheel the full way left & right and then, when asked, just 90 degrees as that's how iRacing determines the full range - it should report in the calibration screen that the lock-to-lock ratio is 900 degrees (assuming that's what you've got in the Logitec profiler)...
Found the calibration issue. Blew out and rebuilt the iracing profile. All seems good now. HUGE difference!
Rick Stratton
(aka Ricklandia)
(aka Ricklandia)
-
- Super
- Posts: 3332
- Joined: Thu Mar 06, 2008 12:33 am
- Location: Bristol (Wurzel Land)
Re: Free 3 month promo
Glad you got it all sorted Rick, she got me in the garden yesterday.
Baz
Safety Fast
Safety Fast
- Rick Stratton
- Legends Admin Team
- Posts: 5301
- Joined: Wed Mar 12, 2008 9:44 pm
- Location: Vermont USA
- Contact:
Re: Free 3 month promo
First race for me in...months? I know, I know... noob MX5's... but it was still a thrill.
Started at the back of the grid [12] and finished 4th. More importantly I managed to actually FINISH a race. I can't even remember how long it's been...
Started at the back of the grid [12] and finished 4th. More importantly I managed to actually FINISH a race. I can't even remember how long it's been...
Rick Stratton
(aka Ricklandia)
(aka Ricklandia)
-
- Site Admin
- Posts: 5166
- Joined: Thu Mar 06, 2008 1:25 pm
- Location: Cheshire, UK
Re: Free 3 month promo
Nice one Rick
-
- Super
- Posts: 3332
- Joined: Thu Mar 06, 2008 12:33 am
- Location: Bristol (Wurzel Land)
Re: Free 3 month promo
Good work Rick, like ridding a bike eh. You will soon be back to winning ways.
Baz
Safety Fast
Safety Fast
-
- Site Admin
- Posts: 5166
- Joined: Thu Mar 06, 2008 1:25 pm
- Location: Cheshire, UK
Re: Free 3 month promo
Bump
Reminder, offer expires on Oct 10th so get in now - you've got nothing to lose!
Reminder, offer expires on Oct 10th so get in now - you've got nothing to lose!